General Settings - D-Link DCS-6220 User Manual

DCS-660 User's Manual
Configuration > Advanced > Network
Reset IP Address at next boot
Once the DCS-6620 is configured, this box should be unchecked at all times. If the box has been checked
and the connection is lost, run Installation Wizard to find the camera's IP address.

General Settings

Secondary DNS:
SMTP
1st SMTP (mail) server:
1st SMTP account name:
1st SMTP password:
e-mail address:
2nd SMTP(mail) server:
2nd SMTP account name:
2nd SMTP password:
D-Link Systems, Inc.
Necessary for network identification.
IP address:
Used to determine if the destination is in the same subnet. The
Subnet mask:
default value is "55.55.55.0."
The router used to forward frames to destinations in a different subnet.
Default router:
Invalid router settings may cause the failure of transmissions to a
different subnet.
Primary domain name server that translates names to IP addresses.
Primary DNS:
Secondary domain name server to backup the primary one.
The domain name or IP address of external mail server.
The user name used to log into your e-mail account (e.g. jdoe or jdoe@
yourisp.com depending on your ISP).
The password used to log into your e-mail account. (The password will
appear as dots instead of entered characters.)
1st recipient
The e-mail address of recipients for snapshots or a system log file.
Multiple recipients must be separated by a semicolon ";"
The domain name or IP address of a secondary mail server used only
if the primary mail server is unreachable.
The user name for the second SMTP server.
The password used to log into the second e-mail account. (The
password will appear as dots instead of entered characters.)
Using the DCS-660 with an Internet Browser
39