Camera Configurations - D-Link DCS-6220G User Manual

DCS-660G User's Manual
Monitor Program (continued)
The Admin Privilege
In the monitor tool system, the admin privilege has the right to access the DCS-6620G 80.11g PTZ
Internet Camera through this application software and change the local settings as well. But the admin
privilege is not the same as the admin privilege as the 80.11g PTZ Internet Camera. You can change
the settings of each selected 80.11g PTZ Internet Camera in the remote site only if you have the admin
privilege of the 80.11g PTZ Internet Camera.
If you have the admin privilege, you have the right to do the following items:



Again, if you need to change the settings of the DCS-6620G, you must have the password of the admin
user.

Camera Configurations

When you log in for the first time, you should configure this application software to connect the DCS-
6620G in "Configuration Menu > Camera Configurations", shown in the figure below. You will need the
admin (administrator) privilege in order to run the configuration.
Once you click "Configuration Menu > Camera Configurations" for setting each camera, all recording
processes will be stopped with a warning window popped up in advance to keep you informed.
D-Link Systems, Inc.
Run the configuration tool
Change the recording schedule
Change the local settings
Using IP surveillance Software
80