Digitus DN-13007 Quick Installation Manual page 8

1. Insert the included CD-ROM (DN-13007 USB MFP Server Product CD) into
the personal computer. The Autorun screen as Fig2 should appear.
2. Click Install Product button.
3. Click Next, if you see any Next button in installation windows.
4. Click Finish.
⑦ . Configure DN-13007 with Utility
Using MFP Control Center Software (Fig3):
1. Open the MFP Control Center. It will automatically search the existing
servers and display their status.
2. Select the server that you want to configure. Double click the selected server
and enter Administrator (default: admin) and Password (default: admin).
3. Name your DN-13007 server and select a codepage for file server function
as Fig4. Please enter server's host name and workgroup for Windows
networking by SMB protocol. The default host name is DN-13007 and
workgroup is. If you want to use the file server function, you have to set the
same codepage as that your Windows PC is using.
4. Assign IP address to DN-13007 as Fig5. Please choose the one method to
set the IP address of the server. You can automatically get IP by using DHCP
or manually assign an IP to the server.
⑧ . Set Up Printers
You can set up your network printer using steps below.
Step 1
Set up Local
Window Printer
Driver
Step 6
Turn on "Online Use
Printer" in Installed
Window Printer
Driver
Note: If you want to install HP all-in-one series printer drivers in Windows, you
Step 2
Connect Your Printer to
MFP Server and Connect
MFP Server to Network
Step 5
Add Network Printer by
-
Windows Standard
Method
-
PC User Software
8
Step 3
Turn on Your
Printer and MFP
Server
Step 4
Configure Your
MFP Server