Related Manuals for Digitus DN-13014
Summary of Contents for Digitus DN-13014
- Page 1 USB PRINTER WIRELESS LAN PRINT SERVER (DN-13014) PARALLEL PRINTER WIRELESS LAN PRINT SERVER (DN-13016) Quick Installation Guide...
-
Page 2: Product Introduction
Product Introduction Thank you for purchasing and using our print server. This print server allows your printer to become a shared device on the network. It offers printing flexibility and manageability on your Wired or Wireless Local Area Network with an absolute minimum setup and maintenance required. -
Page 3: Product Package
in this guide step-by-step to complete the installation. If you find any problem, please refer to the User’s Manual on the CD-ROM for more detail information. Product Package This package contains the following components: One Print Server One Antenna (Only for Wireless Print Server) ... -
Page 4: Administrator Installation And Setup
Status LED will be blinking. When the Status LED is unlighted, the print server is ready. Note: You must use the power adapter shipped along with the print server, do NOT use any other power adapter from other sources. Administrator Installation and Setup The Administrator Installation Program executes a wizard-driven procedure that performs the following tasks:... - Page 5 1. Insert the CD shipped along with the print server into your CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root directory. 2. The “Installation Manager” will be displayed on the screen as following.
- Page 6 4. Click “Next” to install the utilities in the default folder or click “Browse” to specify the destination folder where you would like to install the utilities. 5. Select the components you want to install. It is highly recommended to install all provided components. Click “Next”...
- Page 7 6. Specify the program folder where the program icons will be added to, click “Next”. 7. The system will start to install the utilities automatically.
- Page 8 8. You have completed the installation phase and prepare to configure the Print Server. The “Choose Print Server” will list all Print Servers within the network. Select the Print Server you would like to configure and click “Next”. NOTE 1: If this is the first time you configure the Print Server, the “Print Server Name”...
- Page 9 9. Specify a recognizable name for the Print Server and click “Next”. 10. Specify the IP Address for the Print Server manually or click “Next” to keep default IP Address.
- Page 10 11. The configuration summary is displayed in the window. Now, you have completed the “Print Server Setup”. Click “Finish” and your system will add network port of the Print Server to your PC automatically. 12. The Administrator Installation procedure is totally completed.
-
Page 11: Client Installation And Setup
Client Installation and Setup The Client Installation Program is a wizard driven procedure which will perform the following tasks: Install client utilities and drivers into your PC. Automatically add all Network Ports to your The network port driver supports network protocol auto- detection. - Page 12 1. Insert the CD shipped along with the print server into your CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root directory. 2. The "Installation Manager" will be displayed on the screen as follows.
- Page 13 4. Click “Next” to install the utilities in the default folder or click “Browse” to specify the destination folder where you would like to install the utilities. 5. Specify the program folder where the program icons will be added to, click “Next”.
- Page 14 6. The system will start to install the utilities automatically. 7. Now, the installation procedure is completed, you are ready to set up the client’s computer. All network...
- Page 15 ports of the Print Servers detected on the network will be added to your PC automatically, click “Continue”. 8. The Client Installation procedure is completed. Click “Finish”.
-
Page 16: Windows Add Printer Procedure
Windows Add Printer Procedure After adding a “Network Port” of the print server to your PC by Administrator or Client Installation Program, you can follow the procedure described below to add printer to the Windows. Note that following “Add Printer” steps are running in Windows XP, the steps in other Operating Systems are similar. - Page 17 Step4. Select “Local printer attached to this computer” and make sure that “Automatically detect and install my Plug and Play printer” is not selected. Click “Next”. Step5. Choose the suitable “Print Server Network Port” which was created by the Administrator Installation or Client Installation process and click “Next”.
- Page 18 Step6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. Step7.
- Page 19 Step8. Choose to print the test page or not. It is recommended to print a test page. Click “Next”. Step9. You have added the printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”.
- Page 20 Now you can start to print from your PC to the print server.