Advertisement
Quick Links
Advertisement
Related Manuals for Digitus DN-13014-2
Summary of Contents for Digitus DN-13014-2
- Page 1 USB-PRINTER WIRELESS LAN PRINTSERVER (DN-13014-2) Quick Installation Guide...
- Page 2 Product Introduction Thank you for purchasing and using our print server. This print server allows your printer to become a shared device on the network. It offers printing flexibility and manageability on your Wired or Wireless Local Area Network with an absolute minimum setup and maintenance required.
- Page 3 Product Package This package contains the following components: One Print Server One Antenna (Only for Wireless Print Server) One Power Adapter One Quick Installation Guide One CD-ROM (Including all the software utilities, drivers and User’s Manual) Hardware Installation Procedure Unpack the print server package and verify that all the items listed in the previous section are provided.
- Page 4 The Administrator Installation Program executes a wizard-driven procedure that performs the following tasks: Install all necessary utilities and drivers in your PC (including the client utilities). Prompt to setup the print server (including the print server name and network protocols). ...
- Page 5 The “Utilities Setup” window will be displayed. Click “Next”. Click “Next” to install the utilities in the default folder or click “Browse” to specify the destination folder where you would like to install the utilities.
- Page 6 Select the components you want to install. It is highly recommended to install all provided components. Click “Next” to continue. Click “Install”.
- Page 7 The system will start to install the utilities automatically.
- Page 8 You have completed the installation phase and prepare to configure the Print Server. The “Choose Print Server” will list all Print Servers within the network. Select the Print Server you would like to configure and click “Next”. NOTE 1: If this is the first time you configure the Print Server, the “Print Server Name”...
- Page 9 Specify a recognizable name for the Print Server and click “Next”. Specify the IP Address for the Print Server manually or click “Next” to keep default IP Address.
- Page 10 The configuration summary is displayed in the window. Now, you have completed the “Print Server Setup”. Click “Finish” and your system will add network port of the Print Server to your PC automatically. The Administrator Installation procedure is totally completed. Click “Finish”.
- Page 11 Client Installation and Setup The Client Installation Program is a wizard driven procedure which will perform the following tasks: Install client utilities and drivers into your PC. Automatically add all Network Ports to your PC. The network port driver supports network protocol auto-detection. It will automatically select an available network protocol (TCP/IP, IPX or NetBEUI) of the client computer to connect to the print server.
- Page 12 The "Installation Manager" will be displayed on the screen as follows. Click “Client Installation”. The “Utilities Setup” window will be displayed. Click “Next”.
- Page 13 Click “Next” to install the utilities in the default folder or click “Browse” to specify the destination folder where you would like to install the utilities. Click “Install”.
- Page 14 The system will start to install the utilities automatically.
- Page 15 Now, the installation procedure is completed, you are ready to set up the client’s computer. All network ports of the Print Servers detected on the network will be added to your PC automatically, click “Continue”. The Client Installation procedure is completed. Click “Finish”.
- Page 16 Windows Add Printer Procedure After adding a “Network Port” of the print server to your PC by Administrator or Client Installation Program, you can follow the procedure described below to add printer to the Windows. Procedure for Windows XP (similar for Windows 98SE/ME/2000) Step1.
- Page 17 Step5. Choose the suitable “Print Server Network Port” which was created by the Administrator Installation or Client Installation process and click “Next”. Step6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the...
- Page 18 driver of the printer. After installation, the printer model will be added to the list. Step7. Name your printer and setup the default printer, click “Next”. Step8. Choose to print the test page or not. It is recommended to print a test page.
- Page 19 Step9. You have added the printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”. Now you can start to print from your PC to the print server. Procedure for Windows Vista and 7...
- Page 20 1. Click “Start”, select “Settings\Printers”. 2. Click “Add a Printer”. 3. The “Add Printer” wizard is displayed. Select “Add a local printer”. 4. Choose the suitable printer port which was created by the installation process and click “Next”.
- Page 21 5. Select the printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list.
- Page 22 6. Name your printer and set the default printer, click “Next”. 7. The printer drivers are being installed.
- Page 23 8. It is recommended to print a test page. Click “Finish”. 9. The printer is added to “Printers” page, you have added the printer to your computer successfully.
- Page 24 Now you can start to print from your computer to the print server.