Digitus DN-13007 Quick Installation Manual page 11

port.
8. If you clear Enable SMB/CIFS Print/File Server Authentication in
Supported Protocols, you login to the SMB server without requiring
authentication; otherwise you have to type user name and password to
login to the server. You can add user name and password in User
Account box by MFP control center or server's Web page.
If you use SMB on Windows 98 SE/ME, you must login to your
Windows 98 SE/ME using the same user name as in server's User
Account.
9. Perform Open, Paste, Remove or Copy the files to the shared folders.
-
Using FTP Method for Sharing Storages
1. Open Microsoft IE
2. In Web Address List, type command: "ftp://server's host name " or
"ftp:// server'sIP address". If you have changed the default FTP port : 21,
you have to add the new port number in the tail of command as
"ftp://server's host name:ftp port" or "ftp://IP address of server: ftp port"
3. The shared folders will be listed in IE.
4. If you set Enable Server Authentication in FTP server protocol
settings you have to type user name and password to login to the
server; if you set Allow Anonymous Login, you can use the user name
"anonymous" to login with Read-only permission. If you clear server
authentication, you do not need username or password to login to the
server. You can add user name and password in User Account box by
MFP control center or server's Web page.
5. Perform Open, Paste, Remove or Copy the files to the shared folders.
⑩ . Use Network Scanning Function
1. Connect HP all-in-one series printer (MFP) to the server. Please refer to
User's Manual for more details.
2. Open the User software: MFP Control Center and select your DN-13007 that
the MFP is connecting.
3. Click Network Scan Button (Fig9) and use the scanner (Fig10).
4. Use Windows applications such as MS Word or Photoshop.
⑪ . Upgrade New Firmware
Procedure A: Using PC User Software
11