Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Digitus dn13006w
Summary of Contents for Digitus dn13006w
-
Page 1: Print Server
Print Server Quick Installation Guide... -
Page 2: Product Introduction
1. Product Introduction Thank you for purchasing and using our print server. This print server allows your printer to become a shared device on the network. It offers printing flexibility and manageability on your Wired or Wireless Local Area Network with an absolute minimum setup and maintenance required. -
Page 3: Package Contents
2. Package Contents This package contains the following components: One Print Server One Antenna (Only for Wireless Print Server) One Power Adapter One Quick Installation Guide One CD-ROM (Including all the software utilities, drivers and User’s Manual) -
Page 4: Hardware Installation
3. Hardware Installation 1. Unpack the print server package and verify that all the items listed in the previous section are provided. 2. Connect the print server to the printer you want to share on the network. 3. Connect the print server to your network by attached the network cable to the UTP port of the print server. -
Page 5: Software Installation
4. Software Installation 4.1. Administration Utilities Installation The Administrator Installation Program executes a wizard-driven procedure that performs the following tasks: Install all necessary utilities and drivers in your PC (including the client utilities). Prompt to configure the print server (including the print server name and IP Address). - Page 6 2. The “Installation Manager” will be displayed on the screen as following. Click “Administrator Installation”. 3. The “Print Server Utilities” window will be displayed. Click “Next”.
- Page 7 4. Click “Next” to install the utilities in the default folder or click “Change” to specify the destination folder where you would like to install the utilities. 5. Select the components you want to install. It is highly recommended to install all provided components.
- Page 8 6. Click “Install”. 7. The system will start to install the utilities automatically.
- Page 9 8. You have completed the installation phase and prepare to configure the Print Server. The “Choose Print Server” will list all Print Servers within the network. Select the Print Server you would like to configure and click “Next”. NOTE 1: If this is the first time you configure the Print Server, the “Print Server Name”...
- Page 10 9. Specify a recognizable name for the Print Server and click “Next”. 10. Specify the IP Address for the Print Server manually or click “Next” to keep default IP Address.
- Page 11 11. The configuration summary is displayed in the window. Now, you have completed the Print Server setup. Click “Finish” and your system will add network port of the Print Server to your PC automatically. 12. The Administrator Installation procedure is totally completed. Click “Finish”.
- Page 12 4.2. Client Utilities Installation The Client Installation Program is a wizard driven procedure which will perform the following tasks: Install client utilities and drivers into your PC. Automatically add all Network Ports to your PC. The network port driver supports network protocol auto-detection. It will automatically select an available network protocol (TCP/IP, IPX or NetBEUI) of the client computer to connect to the print server.
- Page 13 2. The "Installation Manager" will be displayed on the screen as follows. Click “Client Installation”. 3. The “Print Server Utilities” window will be displayed. Click “Next”.
- Page 14 4. Click “Next” to install the utilities in the default folder or click “Browse” to specify the destination folder where you would like to install the utilities. 5. Click “Install”.
- Page 15 6. The system will start to install the utilities automatically. 7. Now, the installation procedure is completed, you are ready to set up the client’s computer. All network ports of the Print Servers detected on the network will be added to your PC automatically, click “Continue”. Note that if there are no print servers detected in the network currently, please click “Continue”...
- Page 16 8. The Client Installation procedure is completed. Click “Finish”.
- Page 17 4.3. Windows Add Printer Procedure After adding a “Network Port” of the print server to your PC by Administrator or Client Installation Program, you can follow the procedures described in the following sections to add printer to the Windows Operation Systems. 4.3.1.
- Page 18 4. Choose the suitable printer port which was created by the installation process and click “Next”. 5. Select the printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer.
- Page 19 6. Name your printer and set the default printer, click “Next”. 7. The printer drivers are being installed.
- Page 20 8. It is recommended to print a test page. Click “Finish”. 9. The printer is added to “Printers” page, you have added the printer to your computer successfully. Now you can start to print from your computer to the print server.
- Page 21 4.3.2. Windows XP The following “Add Printer” steps are running in Windows XP, the steps in other Operating Systems such as Windows 98SE/Me/2000 are similar. 1. Click “Start”, choose “Settings” and select “Printers and Faxes”. 2. Click “Add a Printer”. 3.
- Page 22 4. Select “Local printer attached to this computer” and make sure that “Automatically detect and install my Plug and Play printer” is not selected. Click “Next”. 5. Choose the suitable “Print Server Network Port” which was created by the Administrator Installation or Client Installation process and click “Next”.
- Page 23 6. Select a suitable printer manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list.
- Page 24 8. Choose to print the test page or not. It is recommended to print a test page. Click “Next”. 9. You have added the printer to the PC successfully. The information of the printer is displayed in the windows. Click “Finish”. 10.