Digitus DN-13007 Quick Installation Manual page 12

1. Open the DN-13007 MFP Control Center. It will automatically search the
existing servers and display their status.
2. Select the server that you want to upgrade the firmware. Double click the
selected server and enter Administrator (default: admin) and Password
(default: admin).
3. Select the Maintenance button.
4. Click Open to find your new firmware file and click Upgrade to start upgrade
firmware task.
5. Wait for 15 seconds for system reboot.
Procedure B: Using Server's Web Pages
1. Power on MFP server. Suppose server is in DHCP mode.
2. Check MFP server's IP address.
3. First, run MFP Control Center. It will automatically search MFP server on the
LAN. Then server's IP address will be shown in control center.
4. Run any web browser, like Microsoft Internet Explorer. Go to "http://server's
IP address "or "http://server's host name" to access server's home page.
5. Click Configure at the left side menu.
6. Login MFP server with Administrator (default: admin) and Password (default:
admin).
7. Click Maintenance.
8. Click Upgrade Firmware.
9. Click Browse button to choose the file of new firmware.
10. Click Upload button to start firmware upgrade.
11. Wait for 15 seconds for system reboot.
Procedure C: Using Init Button and TFTP Client
1. Simultaneously press Init button and power on (plug in the power adaptor)
the server until LED indicators of Power, USB1 and USB2 blink. Please
note that after that, the servers will operate using the factory default
values after restarting, i.e., your MFP server's configuration will
recover to Factory Default values.
2. Start the TFTP client Tool: Image Burner
3. Type the server's Fallback IP address: 192.168.1.100 and click Open Image
to open your new firmware. Please note that you must configure your PC's
TCP/IP such that PC and server belong to the same LAN, i.e. PC's IP is
192.168.1.xxx and subnet mask is 255.255.255.0.
4. Click Upload Image.
12