Digitus DN-13007 Quick Installation Manual page 10

shown in Fig8.
6. Click OK, and then select a Windows driver for your printer. If you
already have the printer's driver installed, you will be asked whether
to keep it or to replace it. Click Next.
7. Choose whether you want to share the printer with other network
users. Do you want to print a test page? Select the appropriate
radio button and click Next and Finish.
⑨ . Use File Sharing
- File System: This product supports a file format of FAT12/16/32. It will not
support a drive formatted by NTFS, etc.
-
Naming Your Storages: The local drives of the two storages in USB1 port
and USB2 port are named as USBx_DxPx, where USBx represents the
USBx port, Dx represents the the x-th Disk and Px represents the x-th
partition.
-
Setting MFP Server Code Page: MFP Server supports Windows code
pages. If you want to communicate files with MFP server, you have to set
your MFP server codepage to be same as the codepage that your Windows
PC is using.
-
Using SMB Method for Sharing Storages
1. Connect a USB storage device to this product.
2. Select My Network Places
3. Click Display the Computers of Workgroup
4. Double click Microsoft Windows Network icon.
5. Double click the Workgroup that MFP server belongs to. The default
Workgroup name is "ARBEITSGRUPPE". You can refer to MFP Control
Center or server's web pages to get it. You will see that the MFP server
will be displayed as the default host name "DN-13007" or the host name
that you set.
6. If you can not find Workgroup name of MFP server in Microsoft
Windows Network, you can select Search Computer in My Network
Places and type the server's hostname or IP address (eg, default host
name "DN-13007" ) to find it.
7. Double click this host name icon. The folders will be displayed as
USB1_DxPx, and USB2_DxPx where Dx represents the x-th disk and
Px represents the x-th partition with respect to USB1 port and USB2
If your server is running on a different LAN than your windows
PC, you have to type IP address in Port Name box.
10