Options & Accessories; Operating Instructions; Start-Up Procedures - Alto-Shaam AR-7H ELECTRONIC CONTROL Installation, Operation And Maintenance Manual

I N S T A L L A T I O N
DESCRIPTION
DOOR OPTIONS
DOOR HANDLE
CONTROL OPTION KIT
LEGS
STACKING ASSEMBLY
(FACTORY INSTALLED)
SHELF
STAND, STAINLESS STEEL
START-UP
1. The unit should be installed level, and should NOT
be installed in any area where it may be affected by
steam, grease, dripping water, high temperatures or
any other severely adverse conditions.
2. Before operating the cabinet, clean both the interior
and exterior of the unit with a clean, damp cloth and
mild soap solution. Rinse carefully.
3. Clean and install the cabinet side racks. Shelves
should be positioned with the curved end up and
toward the back of the unit.
4. Before operating the unit, become familiar with the
operation of the controls. Read this manual carefully
and retain it for future reference.
M N- 289 53 (R ev 0 ) • 09 /13 • AR-7H Hot H ol di ng Roti sseri e Compani on Operati on & Care Man ual • 8
A R - 7 H — O P T I O N S & A C C E S S O R I E S
SINGLE PANE FLAT GLASS WITH HANDLE
SINGLE PANE FLAT GLASS WITHOUT HANDLE
FOR SINGLE PANE GLASS DOOR ON NON-CONTROL SIDE
ASSEMBLY, FLANGED FEET, 6" (152mm)
OPEN (AR-7H OVER 750-S OR 6•10
O P E R A T I N G I N S T R U C T I O N S
FOR SOFTWARE DOCUMENTATION
ASSEMBLY, 6" (152mm)
AR-7H OVER AR-7H
AR-7E OVER AR-7H (208-240V, 1PH)
AR-7E OVER AR-7H (208-240V, 3PH)
AR-7E OVER AR-7H (380-415V)
SHELF, CHROME PLATED WIRE
SHELF, STAINLESS STEEL WIRE
WITH STORAGE SHELF
D A N G E R
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
PART NUMBER
5009591
5009815
HD-26900
5000886
5001414
5001761
5009711
5008787
5008948
5008922
SH-2851
SH-24720
FR-26550
iN)
5002058
es
SEVERE DAMAGE OR
ELECTRICAL HAZARD
COULD RESULT.
WARRANTY BECOMES VOID IF
APPLIANCE IS FLOODED