Appendix 3 - Windows .Net Framework Environment - Colortrac SmartLF 4080E Installation & Operating Instructions Manual

PART 2.
20.

APPENDIX 3 - WINDOWS .NET FRAMEWORK ENVIRONMENT

The Microsoft .NET Framework 1.1 allows users to run applications built using the .NET Framework 1.1 like the
Colortrac SmartLF application. If the .NET Framework is not installed on the scanner computer the SmartLF program
may load and display onscreen OK but will not be able to communicate with the scanner.
CHECKING FOR AN EXISTING INSTALL OF MICROSOFT .NET FRAMEWORK 1.1
Go to the Control Panel and look for the .NET entry in the programs listing.
If you are using Windows Server 2003
PAS144
Colortrac SmartLF Installation and Operating Manual
•
Retract one side and push down lightly to find the next 'tightest' position for
the lid locking pins to engage in while gripping the media. Note this height
and set the lid to the same height on the opposite side of the scanner.
•
Close the cover
•
Press the red button momentarily to test the movement of the document
•
If the document slips, increase the pressure
•
If the motor stalls, decrease the pressure
•
Eject the media and reload -
UNTIL THE THICK MEDIA IS GRIPPED BY THE REAR ROLLERS
DUE TO THE VARYING SURFACE FRICTION OBTAINABLE AND
EXCESSIVE WEIGHT OF SOME THICK MEDIA IT MAY NOT BE POSSIBLE
TO FIND A SETTING WHICH ALLOWS THE MOTOR TO RUN AND MOVES
THE DOCUMENT IN A MANNER SATISFACTORY FOR SUCCESSFUL
SCANNING.
the .NET Framework 1.1 is installed by default
P/N: P002038 Colortrac Ltd © 2004
21