Okina SIRZ36-754LP User Manual page 7

Model
LED Quantity & Beam Angle
IR Wave Length & Distance
IR Light On / Off
Heater Control
Blower Control
IP Rating
Temper Glass Thickness
IR
Mounting Bracket
Housing
Construction
& Bracket
Coating
Required Power /
Transformer *
Power Consumption
Dimension
Camera Space
Weight
* Power supply / transformer not included
 NOTE 1: IR light distances are entirely dependant upon environmental site conditions and the location at which the unit
is situated. The type of camera being used is also very important.
 NOTE 2: Factory default for the IR LED activation level is 80%. If there is not enough IR light, adjust the VR level to
maximum 100%. Please see #17 in the Part Description section on page 1.
Copyright 2010. All Rights Reserved.
www.okinausa.com
HI11-TKHBL
11 Super Power IR LEDs, 6pc x 25° / 5pc x 45°
850nm ; 395ft / 120m 
Auto Light Sensor Control
18C / 64F (on); 28C / 82F (off)
35C / 95F (on); 25C / 77F (off)
Full-Cable Management
Die-Cast Aluminum Alloy
Ivory Powder Stove
24V AC (+/-10%), 60VA
16.07.87"(L) x 4.33"(W) x 4.53"(H) / 200mm(L) x 110mm(W) x
16.73"(L) x 6.30"(W) x 6.50"(H) / 425mm(L) x 160mm(W) x 165mm(H)
7.72 lbs / 3500g (w/out bracket) ; 11.75 lbs / 5330g (with bracket)
- 7 -
IP66
4mm
16.0W
115mm(H)
REV122010-V17