Table of Contents
Advertisement
I.
LENS:
i.
ii.
iii.
iv.
v.
vi.
Copyright 2010. All Rights Reserved.
www.okinausa.com
Settings concerning Lens can be set in here.
FOCUS:
REAL TIME AF:
Select REAL TIME AF to detect the ambiance light and to adjust the focus
automatically.
ONE PUSH:
When the zoom is changed with the TELE or the WIDE buttons, it becomes
AF Mode. Then, it stops.
MANUAL:
Select MANUAL to adjust the focus by adding or subtracting the shown
setting.
IRIS:
MANUAL: Select MANUAL adjust the IRIS manually.
AUTO: When AUTO is selected, the IRIS will be adjusted automatically.
BRIGHTNESS:
There're 1-15 levels: the bigger the number, the brighter the images. But if
the IRIS has set to be manual, this function will be disabled.
ZOOM SPD:
There're 1-15 levels: the bigger the number, the faster the zoom changing
speed will be.
FOCUS SPD:
There're 1-15 levels: when under the manual mode, the bigger the number,
the faster the focus changing speed will be. However, under REAL TIME
AF and ONE PUSH Modes, the FOCUS SPD is fixed and can not be
adjusted.
DAY/NIGHT:
COLOR: The COLOR mode.
B&W: The BLACK & WHITE mode.
AUTO: When AUTO is selected, it will detect the ambient light to change
from DAY/COLOR to NIGHT/B&W and vice versa.
LEVEL: Select brightness of illumination about changing the day/night mode.
The bigger the number, the brighter the images.
DELAY TIME: can be chosen from 1 to 10 seconds to delay the
switching time (from DAY/Color to NIGHT/B&W time and vise visa.)
OUTPUT: Select output level. D&N OUT: It's the PIN 3 external control
connector.
OUTPUT
L LEVEL
D&N OUT
SYSTEM
HIGH
COLOR
LOW
B&W
(HIGH: 5V; LOW: GND)
H LEVEL
LOW
HIGH
18
REV122010-V17
Advertisement
Table of Contents
