Table of Contents
Advertisement
iv.
v.
vi.
vii.
viii.
ix.
x.
Copyright 2010. All Rights Reserved.
www.okinausa.com
BACKLIGHT:
Even when there's a massive backlight behind the object, bright images of
the background and the object can still be obtained by using the
BACKLIGHT function. Levels: 1~16.
FLC:
Flicker can be eliminated by setting FLC to be ON.
AGC (AUTO GAIN CONTROL)
AUTO: when AUTO is selected, the maximum gain is 26dB.
MANUAL: when MANUAL is selected, the maximum gain can be adjusted
manually, adjusting range from -3 to 28dB.
The more the level of gain increases, the brighter the screen and the level of
noise increases.
SYNC:
INT: Internal synchronization
LL: External line-lock synchronization: when LL is selected, press the SET
BUTTON to confirm. The phase can be set from 0 to 359.
MIRROR:
When ON is selected, images will be horizontal rotated.
POS./NEG.:
Negative/Positive Reversal. Select ON or OFF to enable or disable this
function.
PRIVACY MASK:
AREA SEL：
There're 1~8 masking areas to choose from.
*Press the LEFT/RIGHT buttons to choose the desired areas 1-8.
AREA MODE：
To select the area to be masked or not. ON or OFF.
Selected area setups:
*Press the SET button to enter the chosen area to do the settings.
*Press UP/DOWN to zoom in or zoom out.
Size of the selected area:
*Press the SET button to set the size of the masking area.
*Use the UP/DOWN buttons to select TOP/BOTTOM/LEFT/RIGHT.
*Use the LEFT/RIGHT buttons to shrink or to enlarge the masking area size.
*Press the SET button to exit.
COLOR：There're 8 kinds of colors to choose from, GREEN, ORANGE,
BLACK, WHITE, GRAY, BLUE, RED, PURPLE.
22
REV122010-V17
Advertisement
Table of Contents
