Air Intake Chamber - Subaru LEGACY 2004 Service Manual

INTAKE (INDUCTION)

4. Air Intake Chamber

A: REMOVAL
1) Disconnect the ground cable from battery.
(Except for EC, EK, K4 model)
2) Disconnect the connector from intake air tem-
perature sensor. (Except for EC, EK, K4 model)
3) Loosen the clamp (A) which connects the air in-
take chamber to throttle body.
4) Loosen the clamp (B) which connects the intake
duct to air intake chamber.
5) Remove the bolt (C) which secures the air intake
chamber to the stay.
(B)
(C)
6) Disconnect the three parts of blow-by hose, and
remove the air intake chamber.
Air Intake Chamber
IN-00203
FU-02080
(C)
(A)
IN-02005
IN(H4SO 2.0)-8
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Clamp (A), (B)
⋅
3.0 N m (0.3 kgf-m, 2.2 ft-lb)
Bolt (C)
⋅
6.5 N m (0.66 kgf-m, 4.8 ft-lb)
(B)
(C)
C: INSPECTION
1) Check for cracks or loose connections.
2) Inspect that no foreign objects in the air intake
chamber.
(C)
(A)
IN-02005