Inspection Mode
ENGINE (DIAGNOSTICS)
9) Place the select lever or shift lever in "D" range
(AT model) or "1st" gear (MT model) and drive the
vehicle at 5 to 10 km/h (3 to 6 MPH).
NOTE:
• On AWD model, release the parking brake.
• The speed difference between front and rear
wheels may light ABS warning light, but this indi-
cates no malfunctions. When the engine control di-
agnosis is finished, perform the ABS memory
clearance procedure of self-diagnosis system.
10) Using the OBD-II general scan tool, check for
DTC and record the result(s).
NOTE:
• For detailed operation procedures, refer to the
operation manual of OBD-II general scan tool.
• For detailed concerning DTC, refer to "List of Di-
agnostic Trouble Code (DTC)".
<Ref. to EN(H4SO 2.5)(diag)-70, List of Diagnos-
tic Trouble Code (DTC).>
EN(H4SO 2.5)(diag)-38