LUBRICATION
4. Oil Pump
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle.
3) Remove the under cover.
4) Lower the vehicle.
5) Remove the radiator. <Ref. to CO(H4SO 2.0)-
20, REMOVAL, Radiator.>
6) Remove the crankshaft position sensor.
7) Remove the V-belts. <Ref. to ME(H4SO 2.0)-38,
REMOVAL, V-belt.>
8) Remove the belt tensioner.
Oil Pump
9) Remove the crank pulley using ST.
ST 499977400
ST 499977100
IN-00203
10) Remove the water pump. <Ref. to CO(H4SO
2.0)-15, REMOVAL, Water Pump.>
11) Remove the timing belt guide. (MT model)
12) Remove the crank sprocket.
LU-00046
LU-00011
LU(H4SO 2.0)-10
CRANK PULLEY WRENCH
(2.0 L model)
CRANK PULLEY WRENCH
(2.5 L model)
LU-00012
LU-00013
LU-00014