FUEL INJECTION (FUEL SYSTEMS)
14.EGR Valve
A: REMOVAL
NOTE:
EGR valve is installed to EC, EK and K4 model.
1) Disconnect the ground cable from battery.
2) Disconnect the connector from EGR valve.
3) Remove the EGR valve from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
⋅
19 N
m (1.9 kgf-m, 13.7 ft-lb)
EGR Valve
IN-00203
FU-01152
FU-01153
FU(H4SO 2.5)-30