FUEL INJECTION (FUEL SYSTEMS)
12) Remove the rear brake caliper and tie it to the
side of vehicle body.
13) Remove the parking brake cable from parking
brake assembly. <Ref. to PB-7, REMOVAL, Park-
ing Brake Assembly (Rear Disc Brake).>
14) Lift-up the vehicle.
15) Remove the rear exhaust pipe.
<Ref. to EX(H4SO 2.0)-11, REMOVAL, Rear Ex-
haust Pipe.>
16) Remove the propeller shaft. <Ref. to DS-10,
REMOVAL, Propeller Shaft.>
17) Remove the heat shield cover.
18) Disconnect the connector from rear ABS wheel
speed sensor.
Fuel Tank
19) Remove the bolts which install parking brake
cable clamp.
FU-00462
20) Remove the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear differential with transmis-
sion jack.
(2) Remove the bolt which installs rear shock
absorber to rear suspension arm.
FU-01129
FU(H4SO 2.0)-40
FU-01130
FU-01131
FU-01132