Counting - Acculab 98648-013-61 Operating Instructions Manual

Visit www.balances.com for the best prices on Acculab scales

Counting

Purpose
With the Counting program you can determine the number of parts or items.
Example: Determine the number of uncounted parts; weigh in the selectable reference sample quantity (in this example: 20)
Step
1. Select application program
2. Select Counting
3. Confirm setting
Symbol " " on the display: application is active
4. Place empty container on the balance/scale
5. Zero the balance/scale
6. Place reference sample quantity (20)
on the balance/scale
7. Select reference sample quantity:
in increments of 1 (1, 2, 3, ..., 99) or
in increments of 10 (10, 20, 30, ...,100)
8. Confirm selected reference sample quantity
9. Place uncounted parts on balance/scale
10. Toggle display between mean piece weight,
total weight, and quantity
11. Unload the balance/scale
12. Counting application: clear the reference value
13. Reactivate Counting (if no other
application program has been selected)
14. Repeat procedure starting from Step 5.
www.balances.com is the original deep discount distributor
Key (or instruction)
(ZERO) > 2 sec
(F) repeatedly
(ENTER)
(ZERO)
(F) repeatedly (briefly) or
(F) > 2 sec.
(ENTER)
(F) repeatedly
(ENTER) > 2 sec
(F)
Display
7