www.balances.com is your Acculab deep discount distributor
Counting
Purpose
With the Counting program you can determine the number of parts that each
have approximately equal weight.
Available Features
– Store the current weight value to have it loaded as the preset reference sample
quantity next time you initialize the Counting application
– The reference sample quantity can be changed in the operating menu:
See "Configuring the Balance/Scale"
– The average piece weight is automatically output via the optional data interface
port after initialization, if the menu code for "Printout with data ID codes" is set
– Press [F] to toggle the display between piece count and weight
Factory Settings
Reference sample quantity: 10 (menu code 3. 3. 2)
Preparation
§ Configure the Counting application in the operating menu:
See "Configuring the Balance/Scale"
Menu code 2. 1. 4
Counting
§ Reference sample quantity:
Menu code 3. 3. 1
Menu code 3. 3. 2
Menu code 3. 3. 3
Menu code 3. 3. 4
Menu code 3. 3. 5
100 pcs
See also "Configuring the Balance/Scale"
5 pcs
10 pcs
20 pcs
50 pcs
11