Accessories (Options) - Acculab 98648-013-61 Operating Instructions Manual

Visit www.balances.com for the best prices on Acculab scales

Accessories (Options)

Product
Data interface, mounting kit
– RS-232 interface with cable
– USB interface with cable
Data printer
Lock-down capability
(for anti-theft locking device)
Calibration weights
– for VIC-5101 (5 kg; F2)
– for VIC-3101 (2 kg; F2)
– for VIC-1501 (1 kg; M1)
– for VIC-10KG (5 kg; M1)
– for VIC-6KG (5 kg; M2)
– for VIC-4KG (2 kg; M2)
– for weight compartment,
(right side), (100 g; F1)
C Marking
The balance/scale complies with the following EC Directives
and European Standards:
Council Directive 89/336/EEC "Electromagnetic
compatibility (EMC)"
Applicable European Standards:
Limitation of emissions:
In accordance with product standard EN 61326-1 Class B
(residential area)
Defined immunity to interference:
in accordance with product standard EN 61326-1
(minimum test requirements, non-continuous operation)
Important Note:
The operator shall be responsible for any modifications to
Acculab equipment and must check and, if necessary, correct
these modifications.
On request, Acculab will provide information on the minimum
operating specifications (in accordance with the Standards
listed above for defined immunity to interference).
16
www.balances.com is the original deep discount distributor
Order No. Product
In-use cover:
YADAP-RS – for models without glass draft shield 69V00001
YADAP-USB – for models with glass draft shield
Round glas draft shield
YDP03-0CE
(25 mm high)
LC-1
Weighing pan: – Round
Leveling feet (set of one
YCW6548-00 adjustable foot and one fixed foot)
YCW6248-00
Covers: (set of small parts)
YCW615-00
– Battery compartment
YCW655-00
– Interface port
YCW656-00
– Weight compartment
YCW626-00
69V00006
73/22/EEC "Electrical equipment designed for
use within certain voltage limits"
Applicable European Standards:
EN 60950
Safety of information technology equipment including electrical
business equipment
EN 61010
Safety requirements for electrical equipment for measurement,
control and laboratory use
Part 1: General requirements
If you use electrical equipment in installations
and under ambient conditions requiring higher safety standards,
you must comply with the provisions as specified in the
applicable regulations for installation in your country.
Order No.
69V00002
69V00003
69V00004
– Rectangular 69V00005
69V00007
69V00008