Indoor Unit Installation - Midea INVERTER SPLIT TYPE ROOM AIR CONDITIONER Installation Manual

Indoor unit installation

1. Fit the Installation Plate
1 . F it th e i nstal l a t i o n p late ho r izontally
o n s tructural p a rts of t h e wal l w ith
s p a c e s a round t h e ins t a l l a t i o n plat e .
2 . I f th e w all is m ade of b rick, co n c rete
o r t he li k e , d rill ei g h t ( 8) 5m m d iamet e r
h o l e s i n th e w all.Ins e r t C lip an c h o r f or
a p p r o p r iate mo u n t i n g s crew s .
3 . F it th e i nstal l a t i o n p late on t he wa l l
w i t h e ight (8 ) t ype ?A ? s crews .
Note:
Fit the Installation Plate and drill
holes in the wall according to the
wall structure and corresponding
mounting points on the installation
plate. The installation plate provided
with the machine is differrent according
to the models.
(D i m e n s i o ns are i n ? mm? u n l ess
o therw i s e s tated)
2. Drill a hole in the wall
1. Determine hole positions according
to the diagramdetailed in Fig.5. Drill
one (1) hole (φ65mm) slanting slightly
to outdoor side.
2. Always use wall hole conduit when
drilling metal grid, metal plate or the like.
INSTALLATION INSTRUCTIONS
Correct orientation
of Installation Plate
150mm or more to ceiling
C
Indoor unit outline
Installation plate
120mm or
more to wall
Left rear side
refrigerant
pipe hole φ65
Model A (A: 710, B: 250, C:100, D: 110)
Model B (A: 790, B:265, C:100, D: 150)
150mm or more to ceiling
Indoor unit outline
150
120mm or
more to wall
Left rear side
refrigerant
pipe hole φ65
Hooked Part
100
120mm or more
from the wall
5
Fig.4
D
120mm or
more to wall
90
Right rear side
refrigerant
pipe hole φ65
A
Installation plate
185
120mm or
more to wall
920
Model C
150mm or more from the ceiling
120
Indoor Unit Outline
Model D
Fig.5
Wall
Outdoor
Indoor
Fig.6
Right rear side
refrigerant
pipe hole φ65
120mm or more
from the wall