StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Introduction Packaging Contents • 1 x 6 Port Gigabit Switch • 1 x Terminal Block • 1 x Wall Mount Bracket w/ Screws • 1 x DIN Rail Bracket w/ Screws • 1 x Instruction Manual System Requirements • RJ45 terminated Cat5 or higher Ethernet cabling •...
Terminal Block Power Connector Power can be provided through the dual inputs from separate sources, if needed. One electrical relay can be wired into an alarm circuit. The relay is connected as Normally Closed (will open upon alarm condition). DIP Switch Configuration 1.
Installation DIN Rail / Wall Bracket Installation If you are mounting the IES61002POE product onto either a DIN Rail or to a wall, you will first need to attach the appropriate bracket(s) to the device as shown below. Instruction Manual...
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 12
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the IES61002POE and is the answer not in the manual?
Questions and answers