Suzuki DF9,9 Service Manual page 190

8-4 LOWER UNIT
11. Using special tools, pull out the propeller shaft bearing hous-
ing.
Remove the propeller shaft and bearing housing assembly.
 09930-30104: Sliding hammer
09950-59320: Propeller shaft remover
12. Remove the circlip from gearcase.
Lift out the driveshaft assembly.
13. Remove the pinion gear L, pinion gear back up shim M,
thrust washer N, thrust bearing O and thrust washer P.
14. Remove the forward gear Q, thrust washer R and forward
gear back-up shim S.
15. Remove the nut T and shift rod assembly U.
Disassembly of propeller shaft component
1. Slide propeller shaft 2 away from reverse gear 3 and bear-
ing housing assembly 1.
Account for the reverse gear back-up shim 4 and reverse
gear thrust washer 5.
Pull the push rod 6 and push pin 7 out of the propeller
shaft.