Advertisement
EV80C196KB Microcontroller Evaluation Board User's Manual
Restrictions
Two words of user stack are reserved for use by the iRISM-96 software.Other
memory and/or registers in the target memory will be used by the iRISM-96
software. The exact number and location of this memory is implementation
dependent.
See appendix B or C for further information.
An asynchronous serial port capable of operation at 9600 baud must be
available in the target system. The RISM described in this document uses an
Intel 82510 UART. This version also uses the NMI (Non-Maskable
Interrupt)
to signal that a received data character is available.
1 The TRAP instruction is reserved.
Breakpoints and program stepping will not operate if the user's code is in
EPROM or other nonchangeable
memory.
Advertisement
