Sun Microsystems Fire V440 2-Post Manual page 9

Installing a Sun Fire V440
Server Into a 2-Post Rack
This chapter provides step-by-step instructions for installing a Sun Fire V440 server
into a 2-post rack.
Note - When a Sun Fire V440 server is installed into a 2-post rack, only the disk
drives and power supplies are serviceable in the rack. You need to remove the server
from the rack to service any other component. See the Sun Fire V440 Server Parts
Installation and Removal Guide for more information.
This chapter contains the following procedures and information:
"Checklist of 2-Post Rackmounting and Setup Tasks" on page 2
"Inventory for 2-Post Rackmounting" on page 3
"Attach the Mounting Brackets to the Chassis" on page 4
"Locate the Mounting Holes" on page 5
"Install the Mounting Screws" on page 6
"Install the Server Into the Rack" on page 7
"Install the Server Into a Populated Rack" on page 8
1