Table of Contents
Advertisement
FIGURE C
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 17.
1.
Speed Control Dial (20): The Speed Control Dial is a 6-position speed dial
switch located on the top/front of the handle. By rotating the Speed Control Dial
from 1 to 6, the Saw Blade speed can be set from 500 to 3,000 strokes per
minute. The stroke rate should be set depending upon the material being cut.
(See Figure D, next page.)
2.
Trigger (21): The variable speed Trigger is operated manually simply by squeezing
the Trigger to turn on the Jigsaw and releasing pressure on the Trigger to turn off
the Jigsaw. (See Figure D.)
3.
Trigger Lock (61): The Jigsaw is equipped with a Trigger Lock mechanism. To
operate the tool for extended periods of time squeeze and hold the Trigger, then
depress the Trigger Lock. To unlock the Trigger Lock mechanism, squeeze and
release the Trigger once. (See Figure D.)
4.
Cutting Mode Selector (46): The Cutting Mode Selector can be adjusted to select
the straight cutting mode or orbital cutting mode. The Cutting Mode Selector has 4
position settings. The setting marked "0" is for straight cutting and the settings
marked "I", "II", and "III" are for orbital cutting. (See Figure D.)
SKU 92772
For technical questions, please call 1-800-444-3353
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V ~
Volts Alternating Current
A
Amperes
No Load Revolutions
no
xxxx/min.
per Minute (RPM)
PRODUCT FEATURES
PAGE 11
Hide quick links:
Advertisement
Table of Contents
