Chicago Electric 93213 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Power Tool
  5. 93213
  6. Set up and operating instructions manual
Chicago Electric 93213 Set Up And Operating Instructions Manual

Chicago Electric 93213 Set Up And Operating Instructions Manual

Electric chainsaw sharpener
Hide thumbs Also See for 93213:
Table of Contents

Advertisement

Quick Links

See also: Set Up and Operating Instructions Manual
ELECTRIC CHAINSAW
SET uP ANd OPERATINg INSTRuCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
Copyright
2005 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 07j; 09h
SHARPENER
Model
. All rights reserved. No portion of this manual or any artwork
®
93213

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 93213 and is the answer not in the manual?

Questions and answers

Related Manuals for Chicago Electric 93213

Summary of Contents for Chicago Electric 93213

  • Page 1 ELECTRIC CHAINSAW SHARPENER Model 93213 SET uP ANd OPERATINg INSTRuCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANuAL. Copyright 2005 by Harbor Freight Tools .

  • Page 2: Important Safety Information

    Always lock up tools and injury. keep out of reach of children. use the right tool for the job. not attempt to force a small tool or Page 2 For technical questions, please call 1-800-444-3353. SKU 93213...
  • Page 3 Exposure to aluminum oxide (a dust and perform its intended function. Check generated from material removing REV 07h; 09h SKU 93213 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Only use grinding wheels that fit the Arbor (7/8”). Do not try to change or modify the mounting hole on a grinding wheel to make it fit. Grinding wheel REV 09b Page 4 For technical questions, please call 1-800-444-3353. SKU 93213...

  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    120 volt outlets shown in the low resistance path to carry electricity preceding illustration. (See Outlets for away from the user, reducing the risk of 2-Prong Plug.) electric shock. (See 3-Prong Plug and Outlet.) SKU 93213 For technical questions, please call 1-800-444-3353. Page 5...

  • Page 6: Extension Cords

    Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. Page 6 For technical questions, please call 1-800-444-3353. SKU 93213...

  • Page 7: Specifications

    When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. REV 09h SKU 93213 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: Installation

    Lock Wheel (18) with Bolt When installing the sharpener on a workbench, make sure that the Lock Wheel (18) is accessible, as shown in the mounting picture in FIguRE 1. Page 8 For technical questions, please call 1-800-444-3353. SKU 93213...
  • Page 9 Wheel Base (7), making sure it fits properly. Note: Do not use a grinding wheel if it is chipped, cracked, or worn. You can check if the wheel has cracks not visible SKU 93213 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Operation

    Lift up the Chain Stop (23) and secure the chain in the Sliding Guides (31). See Lower the Top Housing (4B) so that FIguRE 6. the Grinding Wheel (8) skims the chain tooth. Page 10 For technical questions, please call 1-800-444-3353. SKU 93213...
  • Page 11 Handle (34). See FIguRE 8. The Handle (34) should be situated so that you can easily release and tighten it. You will need to release it each time you SKU 93213 For technical questions, please call 1-800-444-3353. Page 11...
  • Page 12 After you repeat all of the steps under Sharpening on page 7, your chain is ready to be mounted on your saw. Page 12 For technical questions, please call 1-800-444-3353. SKU 93213...

  • Page 13: Maintenance

    A dull sound indicates a crack or break. Replace the Grinding Wheel when it grinds down to a diameter of 3 inches. SKU 93213 For technical questions, please call 1-800-444-3353. Page 13...

  • Page 14: Parts List

    THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTAL- LATION OF REPLACEMENT PARTS THERETO. Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. SKU 93213...

  • Page 15: Assembly Drawing

    ASSEMBLY dRAWINg SKU 93213 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Limited 90-Day Warranty

    Camarillo, CA 93011 • (800) 444-3353 not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. Page 16 For technical questions, please call 1-800-444-3353. SKU 93213...

This manual is also suitable for:

Power tools 93213

Table of Contents

Save PDF