Table of Contents
Advertisement
Charger Input
Charger Output
Charge Time
Speed
Maximum Torque
Battery Cell Type
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
read the entire important saFetY inFormation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
WArNINg
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1.
Always make sure the Trigger (36) of the Impact Wrench is not depressed, the
Forward/reverse Switch (32) is in the center, locked position, the Battery (37)
is removed from the Impact Wrench, and the Charger (39) is unplugged from an
electrical outlet prior to making any adjustments to the tool.
SKU 65817
For technical questions, please call 1-800-444-3353.
speCiFiCations
120 V~, 60 Hz, 1.8 A
7.2 - 24 V, 1.5 A
5 hours (Initial)
3-5 hours (recharging)
0-2300 rPM
220 ft-lb
NiCd, 1700 mAh, 1.2 V, Item 96756
unpaCking
list of contents
description
Impact Wrench
Charger
Battery
replacement Carbon Brush
set up instruCtions
risk of accidental starting; resulting in serious personal
injury. turn the Forward/reverse switch to the center, locked
position and unplug the battery from the impact wrench
before making any adjustments to the tool.
tool Features
Qty
1
1
1
4
Page 10
Advertisement
Table of Contents
