Product Features; Specifications; Operating Instructions - Chicago Electric 66182 Set Up And Operating Instructions Manual

SYmBOlOgY
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)

SpEcIFIcATIONS

120 V~ / 60 Hz / 130 Watts
Power Switch: Push Button ON/OFF
Electrical Power Cord: 18 AWG x 3C
Requirements Power Plug: 3-Prong, Grounded
Internal Temperature Control: Rheostat
Power Indicator Light: Red L.E.D.
Product Sharp edge of Blade for line cutting.
Applications Side of Blade for wide groove cutting.
Cutting Depth (3-3/4" with Scale Bracket)
Adjustments (5-7/16" without Scale Bracket)
1-Level = 0° Fahrenheit
2-Level = 248° Fahrenheit
Temperature
3-Level = 527° Fahrenheit
Ranges
4-Level = 725° Fahrenheit
5-Level = 840° Fahrenheit
Push Button, momentary, ON/OFF
.Additional
Power Switch (Automatically returns to
Features
OFF position when released).
UNpAcKINg
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
SKU 66182 For technical questions, please call 1-800-444-3353.

prODUcT FEATUrES

FIgUrE A
TEmpErATUrE
ADJUSTINg KNOB
(9)
pOWEr SWITcH
(19)

OpErATINg INSTrUcTIONS

read the ENTIrE ImpOrTANT
SAFETY INFOrmATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
FrOm AccIDENTAl
OpErATION:
Turn the power Switch (19) of
the tool to its "OFF" position
and unplug the tool from its
electrical Outlet before
performing any inspection,
maintenance, or cleaning
procedures.
To Adjust The cutting Depth:
1. The cutting depth of the Hot Knife
may be adjusted up to 3-3/4" when
using the Scale Bracket. To adjust
the depth, loosen the two Clamping
Screws (3). Pull out or retract the
Scale Bracket to the desired cut-
pOWEr ON
BlADE
lIgHT
(2)
(22)
clAmpINg
ScrEW
ScAlE
(3)
BrAcKET
(1)
TO prEVENT
SErIOUS INJUrY
Page 7