Basic Operations; Volume Settings; Ring Volume - Brother MFC-J6510DW User Manual

Chapter 1

Basic Operations

The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
Press Menu.
b
Press a or b to choose
General Setup.
MENU
MENU
Ink Management
General Setup
Fax
Network
Press OK.
c
Press a or b to choose Mode Timer.
General Setup
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
d
Press d or c to choose 30Secs.
General Setup General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
Press OK.
You can see the current setting on the
LCD:
General Setup
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
Note
Press Clear to go back to the previous
level.
e
Press Stop/Exit.
8
Select & Press
OK
OK
Select & Press
OK
2Mins
On
Select & Press
OK
30Secs
On
Select & Press
OK
30Secs
On

Volume Settings

1

Ring Volume

You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Ring.
e
Press d or c to choose Low, Med, High
or Off.
Press OK.
f
Press Stop/Exit.
1
1
d or c
1