Brother MFC-J6510DW User Manual page 29

Chapter 1
1 Fax, Telephone and Copy keys:
 Duplex Copy
Press this key to copy on both sides of the
paper.
 N in 1 Copy
Press this key to make N in 1 or Poster
copies.
 Fax Preview
Lets you preview incoming and outgoing
faxes on the LCD.
 Tel/R
This key is used to have a telephone
conversation after picking up the external
handset during the F/T Ring (fast
double-ring).
Also, when connected to a PBX, you can
use this key to gain access to an outside
line or to transfer a call to another
extension.
 Redial/Pause
Redials the last 30 numbers called. It also
inserts a pause when programming quick
dial numbers.
Paper Setting (MFC-J6510DW)

Press this key to set the paper size or paper
type.
 Tray Setting (MFC-J6710DW)
Press this key to choose the tray you want
to use for printing.
2 Mode keys:
 FAX
Lets you access Fax mode.
SCAN

Lets you access Scan mode.
 COPY
Lets you access Copy mode.
 PHOTO CAPTURE
Lets you access PhotoCapture Center™
mode.
6
3 Menu keys:
 Volume keys
d c
While the machine is idle, you can press
these keys to adjust the ring volume.
 Phone Book key
Lets you store, look up, and dial numbers
that are stored in the memory.
 d or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
 a or b
Press to scroll through the menus and
options.
 Menu
Access the main menu.
 Clear
Press to delete characters or to go back to
the previous menu level.
 OK
Lets you confirm a selection.
4 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone.
5 Start keys:
 Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scan setting in the
ControlCenter software).
Colour Start

Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scan setting in the
ControlCenter software).
6 Stop/Exit
Stops an operation or exits the menu.