Trimming; Dpof Printing - Brother MFC-J6510DW User Manual

Chapter 8

Trimming

You can trim your photo and print a part of the
image.
Note
If your photo is very small or has irregular
proportions you may not be able to trim
the photo. The LCD will show
Image Too Small. or
Image Too Long.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PHOTO CAPTURE).
b
Press a or b to choose Trimming.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
 Press l or # to enlarge or reduce the
frame size.
 Press each arrow key to move the
position of the frame.
 Press 0 to rotate the frame.
 Press OK when you have finished
adjusting the frame setting.
e
Enter the number of copies you want
using the dial pad.
f
Do one of the following:
Press OK and change the print

settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
50

DPOF printing

8
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When a memory card containing DPOF
information is put into your machine, you can
print the chosen image easily.
a
Make sure you have put the memory
card in the correct slot.
Press
The machine will ask you if you want to
use DPOF settings.
b
Press 1 to choose Yes.
c
Do one of the following:
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Note
A DPOF File error can occur if the print
order that was created on the camera has
been corrupted. Delete and recreate the
print order using your camera to correct
this problem. For instructions on how to
delete or recreate the print order, refer to
your camera manufacturer's support
website or accompanying documentation.
(PHOTO CAPTURE).
8