Sending A Fax; Additional Sending Options; Sending Faxes Using Multiple Settings; Stop Faxing - Brother MFC-J6510DW User Manual

3

Sending a fax

Additional sending
options
Sending faxes using multiple
settings
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, etc.
a
Press (FAX).
The LCD shows:
FAX
FAX
Enter Number
Fax Resolution

Contrast

Glass ScanSize
b
Press a or b to choose a setting you
want to change.
c
Press d or c to choose an option.
Press OK.
d
Go back to b to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 8.)

Stop faxing

To stop faxing, press Stop/Exit.
Fax Press Start
Standard
Auto
A4
Contrast
If your document is very light or very dark, you
3
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
3
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Press
b
Press a or b to choose Contrast.
c
Press d or c to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
3
(FAX).
3
3
3
7