Lcd Screen Indications - Brother MFC-J6510DW User Manual

7 LCD (Liquid Crystal Display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD by
lifting it.
8 One Touch keys
These 8 keys give you instant access to 16
previously stored numbers.
Shift
To access One Touch numbers 9 to 16, hold
down Shift as you press the One Touch key.
Also, if no number is assigned to the key, you
can directly store the number by pressing the
empty key.
9 On/Off
You can turn the machine on and off.
Press On/Off to turn the machine on.
Press and hold down On/Off to turn the
machine off. The LCD will show
Shutting Down and will stay on for a few
seconds before going off.
If you have connected an external telephone or
TAD, it is always available.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.

LCD screen indications

The LCD shows the current machine status
when the machine is idle.
00
1 2
1 Fax Preview
You can check the Fax Preview status.
2 Faxes in memory
Shows how many received faxes are in the
memory.
3 Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
0
4 Current Receive Mode
Lets you see the current receive mode.
 Fax (Fax Only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
5 Memory Status
Lets you see the available memory in the
machine.
6 Ink indicator
Lets you see the available ink volume.
The warning icon
an error or maintenance message. For
details, see Error and Maintenance
messages on page 72.
General information
10:29 1 1 0:2 0:29
01.01.2011 01.01.2011 1.01.2011
Fax Mem.
3 4 5 6
Max
appears when there is
7
1
1