Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings - Brother MFC-J6510DW User Manual

j
Enter the number of copies you want.
k
Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step l.
l
Do one of the following:
 Place the next page on the scanner
glass.
Press 1. Go to step m.
 After all the pages have been
scanned, press 2.
m
Press OK.
The machine starts scanning and
printing the document.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
• If your document causes paper jams, try
using one of the special duplex copy
settings. Press a or b to choose
Advanced and then press OK after
step e. Press a or b to choose DX1 or
DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
• DX1 is not available for A3 or Ledger size
paper.
Setting your changes as a
new default
You can save the copy settings for Quality,
Tray Select (MFC-J6710DW),
Enlarge/Reduce, Density,
Page Layout, Skew Adjustment,
Ink Save Mode, Thin Paper Copy and
Duplex Copy that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press (COPY).
b
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore the copy settings
Quality, Tray Select (MFC-J6710DW),
Enlarge/Reduce, Density,
Page Layout, Skew Adjustment,
Ink Save Mode, Thin Paper Copy and
Duplex Copy, that you have changed, to
the factory settings.
a
Press (COPY).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Making copies
7
7
7
41