Epson Expression 1600 Setup Manual page 5

Epson Expression 1600 Scanner Setup
Scanning Panoramic X-rays with the Epson Expression
Place the panoramic x-ray lengthwise on the scan-
1
ner bed with the image face down, as shown on
page 2. You should leave a border on both sides.
Click on the Preview button shown below. An
2
image will appear in the preview window.
Click on the lower left Marquee button to create a
3
marquee around the image. Use the Image Control
and Tone Corrections features if the image needs
adjustment.
Click on the Scan button to begin scanning the
4
image into the program.
Entering the Panoramic X-Ray into QCIPro and QC2000
6
To enter the panoramic x-ray, hold down the "option" key on
the keyboard and drag the image onto the QCIPro or
QC2000 icon. The window with the cropping tools will
appear as before, but the x-ray image will be centered
between two horizontal white borders, one above and one
below. Crop the image using the cropping square for the
larger image as shown. Once the image is cropped, click
outside the cropping window to capture. Click on the Extra 1
x-ray image in the Input Dialog Box to store the image.
http://www.quickceph.com/docs/1030Expression_Setup.pdf
Quick Ceph
Rotating the Panoramic X-Ray
5
To rotate the image after it is scanned, click on the Image
Menu and select the "Rotate Canvas" option. The program
allows you to rotate the image depending on the original ori-
entation. The example shown above would be rotated "90º
CW".
Save the scanned image as described on page 4.
Use this square to resize the cropping
window for panoramic x-rays.
Page 5 Doc ID# 1030Expression_Setup - Revision 12-1-00
®
Systems