Epson Expression 1600 Setup Manual page 3

Epson Expression 1600 Scanner Setup
Setting up the Scanner Interface (cont..)
After the Preview button has been
5
clicked, the scanner will launch
the Preview Window. This win-
dow allows you to adjust the
image to gain the most clarity.
Marquee Button:
6
Click here first to create a marquee.
Image Controls Button:
Allows you to modify the exposure,
gamma, highlight, shadow, and
threshold settings for the image.
Tone Correction Button:
Allows you to manually adjust the
tone settings on image.
Resizing the Marquee
7
Horizontal Adjustment
Move mouse to a vertical line
until cursor displays horizontal
arrows. Click mouse and drag
to desired marquee size.
Vertical Adjustment
Move mouse to a horizontal
line until cursor displays verti-
cal arrows. Click mouse and
drag to desired marquee size.
Simultaneous Adjustment
To move both, click and drag
the cursor at the vertice.
The Resolution and marquee set-
tings should be changed accord-
ing to the Quick Ceph program
you are using.
NOTE: Values for Target and
Source should be identical for a
1:1 scaling. When settings are
correct, click on icon to "Lock".
If the image needs adjustment,
8
you can use both the Image
Controls or the Tone Correction
features.
For Dark X-rays:
Image Controls Window
Increase Exposure slightly
Increase Gamma
Reduce Shadow slightly
Tone Correction Window
Click on the Tone Curve Name
and select "Lighten".
http://www.quickceph.com/docs/1030Expression_Setup.pdf
Quick Ceph
Marquee window - The image inside the
dashed lines will be captured.
Cursor turns into a hand when placed inside marquee
window. This allows you to move the marquee window.
Make sure all soft tissue and landmarks are visible
within the marquee.
Recommended Settings for
Quick Ceph Image Pro
Tone can also be manually adjusted by dragging on
the tone boxes.
Page 3
®
Systems
Recommended Settings for
Quick Ceph 2000
Doc ID# 1030Expression_Setup - Revision 12-1-00