Replacing The Outer Casing - CAB MACH4 Service Manual

 Replacing Assembly Units
10
.5

Replacing the Outer Casing

Danger!
Danger to life and limb from electric shock!

Disconnect the device from the mains supply before opening the outer casing.
Fig. 4
1 Two screws
2 Outer casing
The outer casing can be removed complete with the cover.
1. Open the cover (4), remove the roll hub and material.
2. Unscrew 2 screws (1) from the front of the casing.
Unscrew 2 screws (3) from the inside of the floor.
3.
4. Remove the outer casing (2) together with the cover (4).
Mount the outer casing with the cover in the reverse order. Hinge up the print module for easier inserting the parts.
1 2 3
Replacing the outer casing
4
3 Two Screws
4 Cover
10