TELEFONICA USB Adapter User Manual page 9

Once the installation programme has correctly installed the USB Adapters drivers and
utility, the screen shown above will appear, press "Finalizar" to exit the installation
programme. Depending on the operating system that you PC has installed, your PC
may ask you to restart the PC, if so restart your PC.
When all the installation processes have finished, connect your USB Adapter to a USB
port of your PC and make sure that the task bar at the bottom right hand side of your
screen has a new icon corresponding with your wireless device.
Windows 2000
If the icon appears red, this indicates that you have not yet associated your USB
Adapter with another wireless device.
Important note: If the icon that corresponds with the wireless network appears
"crossed out", this is because the USB adapter has not yet been configured for an
access point.
Windows 2000
In the following chapter you will find the wireless network configuration procedure.
USB Adapter
User Manual
Windows XP
Windows XP
Page 9