TELEFONICA USB Adapter Quick Start Manual

Quick Start guide USB Adaptor
Equipamiento ADSL
Inalámbrico
USB Adapter Installation
1. Make sure that the USB Adapter is not connected to a USB port and boot
up your computer.
2. Once your C has booted up, insert the installation CD provided with the
USB Adapter. The start-up menu will appear automatically. If the start-up
menu does not appear automatically, double click on the AutoRun.exe file
that you will find in the CD.
3. Select "Instalar Adaptador USB". The wireless device wizard will start.
Follow the steps until the installation is completed.
4. Once you have finished the installation, connect the USB Adapter to your
computer. The operating system will detect the connection with the new
device and automatically install its corresponding drivers.
5. The USB Adapter is now ready for use. In the Windows task bar you will
Windows XP
find the "Monitor de Red Inalámbrica" icon. The red or blue colour of the icon
will inform you of the connection status. In Windows XP you will find
Windows XP wireless connection icon.
Windows 2000
6. Make sure the "WLAN" LED on the wireless router is on so that you can
connect the USB Adapter. See the routers user manual for more information
or see www.telefonicaonline.com.
7. Configure your USB Adapter with the "Monitor de Red Inalámbrica" or
with Windows XP utility according to the routers wireless parameters:
Network name (SSID), encryption (WPA or WEP). You can verify these
parameters on a label that is situated on the under part of the router or
checking the Agente ADSL configuration of your router (for more information
consult the routers user manual). Below you can find the sample of the
under part of the router.
.