Table of Contents
Advertisement
Parameters:
-
DHCP: Select "Desactivado" if you want to specify the addresses
manually. Select "Activado" if you have a DHCP Server connected to your
network. If you select "Desactivado" you must fill in the rest of data
specified below.
-
Dirección IP: This is the IP address that you must configure in the PC that
has the PCMCIA Card installed. It must be within the same range as the
IP address configured in your ADSL router for Internet access.
-
Máscara: Must be the same as in your ADSL modem/router.
-
Puerta de enlace: The IP address of your ADSL modem/router.
-
Servidor DNS: Supplied in a letter sent by Telefónica or you can also call
900 50 20 10 from your ADSL line or see www.telefonicaonline.com.
6.2.- DRIVER VERIFICATION
In the case of your USB Adapter is not activated (LED permanently off), make sure that
the device's drivers are correctly installed. To verify this follow these steps:
-
In Windows 2000: Select Start -> Settings -> Control Panel. The Control
Panel window will open, select "System". Then select "Device Manager"
and "Network Adapters".
-
In Windows XP: Select "Start" and right click on "My Computer", select
"Properties". Then select the tab "Hardware", click on the "Device
Manager" and select "Network Adapters".
The USB Adapter is identified as:
USB Adapter
User Manual
"RT2500 USB Wireless LAN Card"
Page 41
Advertisement
Table of Contents
