Table of Contents
Advertisement
4.2.- CONFIGURATION UNDER WINDOWS 2000
To open the Monitor de Red Inalámbrica, double click on the corresponding icon in the
task bar (Utility Icon).
The following screen appears:
The Monitor de Red Inalámbrica will show the "Enlace" screen. As you can see from the
graphic on this screen, a link with a wireless access point has not yet been established
("X" between the USB Adapter and the access point). Because the link has not yet been
made with a wireless device, the monitor can not determine whether the connection
to the Internet is correct. When the utility has been configured, these graphic will help
you to decide on the working state of the USB Adapter and its connections.
Click on the "Redes Disponibles" tab. In this screen you will find all the available
networks that are with the signal range of the USB Adapter.
In this screen you will see a "Refrescar" button, when you click on this button the
programme will search for all the wireless networks within the signal range and
refresh the screen. If after pressing this button no wireless networks appear, you will
need to move around until you find a signal.
In the example you will see a wireless network called "Telefonica". In the screen you
will see that this network is based on a "Punto de Acceso" (access point), that will work
under canal (channel) 1 has the encriptación (encryption) enabled.
USB Adapter
User Manual
Page 18
Advertisement
Table of Contents
