Table of Contents
Advertisement
The Monitor de Red Inalámbrica will ask you to give the new profile a name. This name
is only to help you to identify the new profile. For example you can use the name
"Home" in our example the name "Domicilio".
Press "Siguiente" to select the connection parameters.
Next the utility will ask for the configuration information. Firstly it will ask for the
wireless network name. You can type in the network name or select the network by
pressing on the arrow next to the "Nombre de Red" option which is recommended. If
you choose to type in the network name manually, the name has to be exactly the
same; if you select the name from the list you eliminate any margin of error.
The next parameter is the type of network you wish to use ("Tipo de Red"). If you wish
to connect to an access point or wireless ADSL modem/router, you must always select
"Punto de Acceso". The mode "Punto a Punto" (point to point) is reserved for
alternative applications and if you select this mode, you will not be able to connect to a
USB Adapter
User Manual
Page 20
Advertisement
Table of Contents
