Table of Contents
Advertisement
specified in this chapter. This manual only describes the installation, configuration and
maintenance procedure of the USB Adapter as a wireless client.
3.1.- PHYSICAL INSTALLATION OF THE USB ADAPTER
Due To device being USB standard, the installation procedure is very easy. This type of
device is very user friendly due to the PC automatically detecting new devices that
have been connected.
Please follow carefully the steps to connect each of your PC's:
1. Start up your PC without the USB Adapter connected.
2. Insert the CD-ROM, included in the box, into your CD reader. The CD-ROM will
play automatically.
3. Select the option "Instalar AdaptadorUSB".
4. Please refer to chapter "3.2.- DRIVER AND MONITOR DE RED INALÁMBRICA
INSTALLATION".
5. Connect the USB Adapter to a USB port on your PC.
6. Refer to the chapter "4.- MONITOR DE RED INALÁMBRICA CONFIGURATION" to
configure your USB Adapter.
Remember:
It is very possible that during the installation in your PC, you will need your operating
systems CD-ROM. It is highly recommended that you have this handy during the
installation procedure.
3.2.- DRIVERS AND MONITOR DE RED INALÁMBRICA INSTALLATION
Once you have inserted the CD provided inside the USB Adapters box, the installation
procedure will automatically start up. If the screen shown below does not appear,
double click on the "AutoRun.exe". Select "Instalar Adaptador USB".
USB Adapter
User Manual
Page 6
Advertisement
Table of Contents
