TELEFONICA USB Adapter User Manual page 21

wireless access point. Consult chapter 2.2 "Types of Wireless networks" in this manual
to obtain more information about point to point configurations.
To configure your USB Adapter in point to point mode you must select "Punto a Punto"
in "Tipo de Red" and the channel your point to point network works under.
The last parameter in this screen is the speed your USB Adapter will connect to the
access point. Your wireless network can operate under the four speeds corresponding
with the 802.11b standard: 1Mbps, 2Mbps, 5,5Mbps, 11Mbps and the 802.11g speeds:
54, 48, 36, 24, 18, 12, 9, 6Mbps. You can force the USB Adapter to work under any of
these speeds or set the USB Adapter to automatically select the speed for you. This
mode will always select the optimum speed possible. Sometimes it is necessary to
reduce the operating speed so as not to loose the connection, but nearly always the
best option is to select "Automático"
Press "Siguiente" once you have selected the three parameters. The utility will then ask
you to select the encryption that your connection requires.
USB Adapter
User Manual
Page 21