Table of Contents
Advertisement
The PCMCIA Card cannot connect to the access point
Cause: There is not a sufficient signal range or there are signal interferences.
Solution: See incident above.
Cause: The access point is off.
Solution: Check the access point's power supply.
Cause: Incorrect profile user parameter.
Solution:
-
One of the most common wireless network incidents is the incorrect key which
is specified in the user profile. In the Monitor de Red Inalámbrica, make sure the
parameters that are specified are correct, primarily the network name of the
wireless network and the encryption key.
The wireless network Works but I do not have Internet access
Cause: The IP configuration is incorrect
Solution:
-
Make sure the IP configuration data is correct in your user profile as per
the following explanation:
USB Adapter
User Manual
Page 40
Advertisement
Table of Contents
