Table of Contents
Advertisement
4.- WIRELESS CLIENT CONFIGURATION
Before connecting the USB Adapter to a wireless network, please you must have the
following:
1. Make sure that the wireless option is activated in your router. Check that the
"WLAN" LED is on. Refer to the routers user manual to activate if the "WLAN"
LED is off.
2. Verify the wireless parameters of your wireless network: Network name (SSID),
encryption (WPA or WEP). You can check these parameters on the label situated
on the bottom side of the router or checking in the Agente ADSL (for more
information, consult the routers user manual).
4.1.- CONFIGURATION UNDER WINDOWS XP
Once you have installed your wireless adapter in your PC, the wireless network
configuration tool becomes enabled en Windows XP which allows you to connect to a
wireless network and verify the wireless network status. In this chapter screen shots
are taken as an example to assist you to make your wireless connection.
4.1.1.- CONNECTING TO A WIRELESS NETWORK
1. To configure the wireless network monitor, double click on Wireless Network
connections icon shown on the task bar.
Connected to a wireless network:
Not connected to a wireless network:
Connection limited or null:
2. In the option General clic on the button Find Wireless Networks.
USB Adapter
User Manual
Example of the label on the router.
Page 10
Advertisement
Table of Contents
