1. Simple Settings Function
•
This allows the filter lifetime, operating mode
priority change, central control address, and other
settings to be made for an individual or group-
control indoor unit to which the remote controller
used for simple settings is connected.
When simple settings mode is engaged, operation
stops at the individual or group-control indoor unit
to which the remote controller for simple settings is
connected.
<Procedure>
➀
Press and hold the
simultaneously for 4 seconds or longer.
➁
"
" unit No. "
group control), item code "
"
" are displayed blinking on the remote
controller LCD display (Fig. 4-1). At this time, the
1
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
➂
If group control is in effect, press the
button and select the address (unit No.) of the
2
indoor unit to set. At this time, the fan at the indoor
unit begins operating.
* If unit No. "
will be made for all indoor units.
3
➃
Press the temperature setting
buttons to select the item code to change.
➄
Press the timer time
desired setting data.
4
* For item codes and setting data, refer to the
following page.
➅
Press the
5
and remains lit, and setting is completed.)
➆
Press the
controller display.
6
and
buttons
" (or "
" in the case of
," and settings data
" is displayed, the same setting
/
/
buttons to select the
button. (The display stops blinking
button to return to normal remote
[Remote Controller Functions Section]
7
1
6
4 - 2
Mini VRF SYSTEM
Remote Controller Functions
2
CZ-RTC2
5
Fig. 4-1
3
4